Motorola WS5100 用户手册

4-61

 

2. Click the 

 tab. 

3. Select the 

checkbox to display MU statistics as gathered over the last 30 seconds.

4. Select the 

checkbox to display MU statistics as gathered over the last hour.

5. Refer to following details as displayed within the 

 table:

6. Click the 

 button to launch a screen with additional information about the selected MU. For more 

information, see 

.

Displays a numerical identifier used to associate a particular Radio with a set of statistics. 
The Index is helpful for distinguishing the radio from other radios with a similar 
configuration.

Displays the Hardware or Media Access Control (MAC) address for the MU. The MAC 
address is hard coded at the factory and cannot be modified.

Displays the name of the WLAN the MU is currently associated with. Use this information 
to determine if the MU/WLAN placement best suits the intended operation and coverage 
area of the MU.

Displays the average throughput in Mbps between the selected MU and the access port. The 
Rx column displays the average throughput in Mbps for packets received on the selected MU 
from the access port. The Tx column displays the average throughput for packets sent on the 
selected MU from the access port.

Displays the average bit speed in Mbps for the selected MU. This includes all packets sent 
and received.

Displays the percentage of the total packets for the selected MU that are non-unicast 
packets. Non-unicast packets include broadcast and multicast packets.

Displays the average number of retries per packet. A high number in this field could indicate 
possible network or hardware problems.