Motorola WS5100 用户手册

5-8   WS5100 Series Switch System Reference Guide

 

7. From the 

 field, use the 

 drop-down menu to define the switch interface 

used for the newly created DHCP configuration. Use VLAN1 as a default interface if no others have been 
defined.

Additionally, define the 

and 

used for DHCP discovery and requests between 

the DHCP Server and DHCP clients. 

8. Within the 

 field, define one of the two kinds of leases the DHCP Server assigns to its clients:

• Infinite - If selected, the client can used the assigned address indefinitely.

• Actual Interval - Select this checkbox to manually define the time interval for clients to use the DHCP 

server assigned addresses. The default lease time is 600 seconds, with a minimum setting of 10 
seconds and a maximum value of 946080000 seconds.

9. Within the 

 field, change the server type used with the pool and use the 

 and 

 

buttons to add and remove the IP addresses of the routers used.

10.Provide the 

 (starting and ending IP addresses) for this particular pool.

Use the 

 and 

buttons as required to define the range of supported IP addresses.

A network pool without any include range is as good as not having a pool, because it won't be useful in 
assigning addresses.

11.Click 

 to save and add the changes to the running configuration and close the dialog.

12.Refer to the 

field.

The Status is the current state of the requests made from the applet. Requests are any “SET/GET” 
operation from the applet. The Status field displays error messages if something goes wrong in the 
transaction between the applet and the switch.

13.Click 

 to close the dialog without committing updates to the running configuration

The DHCP Server screen’s Configuration and Host Pool tabs can be used to display an additional 

 screen.

To define new global name and value and send it to other peer switches in the mobility domain:

1. Select 

> 

 from the main menu tree.

The DHCP Server screen displays with the 

 tab displayed.

NOTE: The IP address and subnet mask of the pool are required to match the addresses of 
the layer 3 interface in order for the addresses to be supported through that interface.