Motorola WS5100 用户手册

6-27

 

8. Refer to the 

field for the current state of the requests made from applet. This field displays error 

messages if something goes wrong in the transaction between the applet and the switch.

9. Click 

to use the changes to the running configuration and close the dialog.

10.Click

to close the dialog without committing updates to the running configuration.

Use the 

screen to view set of statistics for those ACLs defined for use with the switch.

To review ACL statistics:

1. Select 

> 

 from the main menu tree.

2. Click the 

 tab.

3. Refer to the following information as displayed within the

 tab:

Displays the Ethernet 1, Ethernet 2 or VLAN 1 interface used to add the ACL association to 
the switch.

Displays the permit, deny or mark designation for the ACL. If the action is to mark, the packet 
is tagged for priority. 

Displays the protocol used with the ACL. Options available to the switch include icmp, ip, tcp 
and udp.

Displays the Low Source IP Address from where the packets are sourced.

Displays the High Source (highest address in available range) IP Address from where the 
packets are sourced.

Displays the Low Destination (lowest address in available range) IP Address.