Motorola WS5100 用户手册

6-73

 

6. To modify the attributes of an existing group, select the group from the list of groups displayed and click 

the 

button.

Modify the existing group’s guest designation, VLAN ID, access period and WLAN assignment.

7. If an existing group is no longer needed (perhaps obsolete in function), select the group from those 

displayed and click the 

 button to permanently remove the group from the list of available groups.

8. To create a new group, click the 

 button and provide the following information. 

a. Refer to the 

 field for the current state of the requests made from applet. This field displays 

error messages if something goes wrong in the transaction between the applet and the switch.

b. Click 

 to use the changes to the running configuration and close the dialog.

c. Click 

 to close the dialog without committing updates to the running configuration. 

Accounting logs contain information about the use of remote access services by users. 

To display the Radius accounting logs:

1. Select 

 > 

 from the main menu.

Define a unique group name that differentiates this new group from others with similar 
attributes. 

Select the 

checkbox to assign this particular group (and the users within) only 

temporary access to the local Radius server, thus restricting their authentication period to a 
user defined access interval. 

Define the VLAN ID for the new group. The VLAN ID is representative of the shared SSID 
each group member (user) employs to interoperate with one another within the switch 
managed network (once authenticated by the local Radius server).

Set the time the group is authenticated to interoperate within the switch managed network. 
Each user within the group will be authenticated with the local Radius server. Those group 
members successfully authenticated are allowed access to the switch managed network 
using the restrictions defined for the group.

Set the time each group’s user base will loose access privileges within the switch managed 
network. After this time, users within this group will not be authenticated by the local Radius 
server. However, if a user is part of a different group that has not exceeded their access end 
interval, then the user may still interoperate with the switch (remain authenticated) as part 
of that group.

Use the Available WLANs 

 and 

 functions to move WLANs for this new 

group from the available list to the configured list. Once on the configured list (and the 
changes applied), the members of this group can interoperate with the switch on these 
WLANs (once authenticated by the local Radius server).

The Configured WLANs columns displays the WLANs this new group can operate within 
(once users are configured). Use the 

 and 

functions to move WLANs from 

the available list to the configured list.

Select the checkboxes corresponding to the days of the week you would like this new group 
to have access to the switch managed network using the WLANs configured. Of course, the 
user base within the group still needs to be authenticated by the local Radius server first.