Motorola WS5100 用户手册

7-6   WS5100 Series Switch System Reference Guide

 

The 

 screen allows the user to modify a community name and change its read-only or read/write 

designation. Since the community name is required to match the name used within the remote network 
management software, it is recommended the name be changed appropriately to match a new naming (and 
user) requirement used by the management software. 

To modify an existing SNMP v1/v2 Community Name and Access Control setting:

1. Select 

>

>

from the main menu tree. 

2. Select an existing Community Name from those listed and click the 

button. 

3. Modify the 

 used to associate a site-appropriate name for the community. The name 

revised from the original entry is required to match the name used within the remote network 
management software.

4. Modify the existing read-only (R) 

 or read/write (RW) 

 for the community. Read-only 

access allows a remote device to retrieve information, while read/write access allows a remote device 
to modify settings. 

5. Click 

 to save and add the changes to the running configuration and close the dialog.

6. Refer to the 

 field for the current state of the requests made from applet. This field displays error 

messages if something goes wrong in the transaction between the applet and the switch

7. Click 

to return back to the SNMP v1/v2 screen without implementing changes.

SNMP Version 3 (SNMPv3) adds security and remote configuration capabilities to previous versions. The 
SNMPv3 architecture introduces the User-based Security Model (USM) for message security and the View-
based Access Control Model (VACM) for access control. The architecture supports the concurrent use of 
different security, access control, and message processing models.

Refer to the 

 screen to review the current SNMP v3 configuration. An Existing User Name can be selected 

and edited, enabled or disabled. . 

NOTE: The SNMP undo feature is not supported in this product.