Motorola WS5100 用户手册

7-16   WS5100 Series Switch System Reference Guide

 

Refer to the 

screen to review the attributes of existing SNMP trap receivers (including 

destination address, port, community, retry count, timeout and trap version). A new v2c or v3 trap receiver 
can be added to the existing list by clicking the 

button.

To configure the attributes of SNMP trap receivers:

1. Select 

from the main menu tree. 

2. Refer to the following SNMP trap receiver data to assess whether modifications are required. 

3. Highlight an existing Trap Receiver and click the

button to display a sub-screen used to modify the 

v2c or v3 Trap Receiver. 

Edit Trap Receivers as needed if the existing trap receiver information is insufficient. You can only modify 
the IP address, port and v2c or v3 trap designation within the Edit screen. For more information, see 

.

The 

 defines the numerical (non DNS name) destination IP address for 

receiving the traps sent by the SNMP agent.

The 

specifies a destination User Datagram Protocol receiving traps. 

Enter a Community name specific to the SNMP-capable client that receives the traps. The 
community name is public. 

The Retry Count specifies the maximum number of retries attempted (to reach the 
destination address) before the session times out. 

The Timeout value specifies the time (in seconds) for the retransmission of packets. If this 
time is exceeded, the session is terminated. The deafult (and permanent value is 1500).

The Trap Version defines the kind of trap that will be made by the SNMP-capable client that 
is receiving the trap. A trap designation cannot be modified.