Motorola WS5100 用户手册

7-21

 

5. Select the role to assign to the user from the options provided in the 

field. Select one 

or more of the following options: 

6. Select the access modes you want to assign to the user from the options provided in the 

panel. Select one or more of the following options:

7. Refer to the 

 field for an indication of any problems that may have arisen.

The Status is the current state of the requests made from applet. This field displays error messages if 
something goes wrong in the transaction between the applet and the switch.

8. Click on 

to complete the modification of the users privileges.

9. Click 

 to revert back to the last saved configuration without saving any of your changes.

If necessary, modify user permissions without any administrative rights. The Monitor option 
provides read-only permissions.

Optionally assign this role to someone who typically troubleshoots and debugs problems 
reported by the customer. the Help Desk Manager typically runs troubleshooting utilities (like 
a sniffer), executes service commands, views/retrieves logs and reboots the switch.

The 

 provides configures all wired and wireless parameters like IP 

config, VLANs, L2/L3 security, WLANs, radios, IDS and hotspot. 

System Administrator Select 

 (if necessary) to allow the user to configure general settings 

like NTP, boot parameters, licenses, perform image upgrade, auto install, manager 
redundancy/clustering and control access. 

Assign 

 privileges (if necessary) to add users for Web 

authentication (hotspot).

Select 

 (if necessary) to assign complete administrative rights. 

NOTE: By default, the switch is https enabled with a self signed certificate. This is required 
since the applet uses https for user authentication.

NOTE: There are some basic operations/CLI commands like exit, logout and help available 
to all the user roles. All roles except Monitor can perform Help Desk role operations.

This option provides the new user access to the switch using the console (applet).

This option provides the new user access to the switch using SSH.

This option provides the new user access to the switch using Telnet

This option provides the new user access to the switch the Web UI (applet).