Motorola WS5100 用户手册

3-24   WS5100 Series Switch System Reference Guide

 

12.Refer to the

 field for the current state of the requests made from the applet. Requests are any 

“SET/GET” operation from the applet. The Status field displays error messages if something goes wrong 
in the transaction between the applet and the switch.

13.Click 

 to close the dialog without committing updates to the running configuration.

The 

 screen allows you to enable a facility that will poll a server address (you designate) 

when the switch is booted. If updates to are found since the last time the switch was booted, the updated 
version is uploaded to the switch to use the next time the switch is booted. Enable this option for either the 
firmware, configuration file or cluster configuration file when you always want to use the most recent 
versions available to the switch. Motorola recommends leaving this setting disabled if a review of a new file 
is required before it is automatically used by the switch.

To enable and configure the automatic update feature for switch firmware, configuration files and cluster 
configurations:

1. Select 

 > 

from the main menu tree. 

2. Refer to the 

 field to enable and define the configuration for automatic 

configuration file updates. If enabled, the located (updated) configuration file will be used with the 
switch the next time the switch boots. 

Select the 

checkbox to allow an automatic configuration file update when a new 

(updated) file is detected (upon the boot of the switch) at the specified IP address.

Define the 

 of the server where the configuration files reside. If a new version is 

detected when the switch is booted it will be uploaded to the switch and used upon the next 
boot of the switch.

Enter the 

 required to access the FTP or TFTP server.