Motorola WS5100 用户手册

4-14   WS5100 Series Switch System Reference Guide

 

6. Select an interface as click the 

 button to invoke the selected interface the next time the switch 

is booted.

7. Select an interface as click the 

 button to disable the selected interface.

To add a new virtual interface :

1. Select 

> 

the main tree menu.

2. Select the 

tab.

3. Click on the 

button.

4. Enter the 

 for the switch virtual interface.

5. The IP Setting field consists of the following:

a. Select 

 enable DHCP to provide the IP address 

for the switch’s virtual interface. Selecting this disables the IP address field.

b. Enter the 

 for the VLAN associated virtual interface.

c. Enter the 

 for the IP address.

6. Select the 

 checkbox to enable any host displayed in this VLAN to 

configure the switch.

7. Refer to the 

 field for the current state of the requests made from applet. This field displays error 

messages if something goes wrong in the transaction between the applet and the switch.

8. Click 

 to use the changes to the running configuration and close the dialog.

9. Click 

 to close the dialog without committing updates to the running configuration.

To modify an existing virtual interface.

1. Select 

> 

the main tree menu.

CAUTION: When changing from a default DHCP address to a fixed IP address, set a static 
route first. This is critical when the switch is being accessed from a subnet not directly 
connected to the switch and the default route was set from DHCP.