Alcatel Carrier Internetworking Solutions 6600 用户手册
User Documentation Addendum
vlan port-mac bandwidth
Release 5.1.6.R02 User Guide Supplement
June 2005
page 1-5
vlanHAPortTable
vlanHAPortVlanId
vlanHAPortType
vlanHAPortIfIndex
slMacToPortMacTable
vlanHAPortVlanId
slMacToPortMacAddress
vlanTable
vlanNumber
Chapter 42, “802.1X Commands”
On page 42-11 replace the Examples section for the show 802.1x command with the following:
-> show 802.1x 1/13
802.1x configuration for slot 1 port 13:
direction
= both,
operational directions
= both,
port-control
= auto,
quiet-period (seconds)
= 60,
tx-period (seconds)
= 30,
supp-timeout (seconds)
= 30,
server-timeout (seconds)
= 30,
max-req
= 2,
re-authperiod (seconds)
= 3600,
reauthentication
= no
Guest Vlan ID
= 20,
Supplicant polling retry count = 2
On page 42-12 the following two new field definitions should be added to the Output Definitions table
for the show 802.1x command:
for the show 802.1x command:
On page 42-13 the following MIB information should be added to the MIB Objects section for the
show 802.1x command:
show 802.1x command:
alaDot1xGuestVlanConfTable
alaDot1xGuestVlanNumber
alaDot1xSuppPollingCnt
The following three new commands should be included in this chapter:
Guest VLAN ID
Indicates if a guest VLAN is configured for non-802.1x traffic received
on the port. If so, a VLAN ID number appears in this field. Configured
through the
on the port. If so, a VLAN ID number appears in this field. Configured
through the
command This field does not appear on
an OmniSwitch 6800.
Supplicant polling retry
count
count
The number of times a device is polled for EAP frames to determine
whether or not the device is an 802.1x client. Configured through the
whether or not the device is an 802.1x client. Configured through the
command. This field does not appear on an
OmniSwitch 6800.