Advantech EKI-7758F 用户手册
EKI-7758F User Manual 110
C.2 Port
C.2.1 Port Statistics
The following information provides the current port statistic information.
• Port: The port number.
• Type: Displays the current speed of connection to the port.
• Link: The status of linking—‘Up’ or ‘Down’.
• State: It’s set by Port Control. When the state is disabled, the port will not transmit or
receive any packet.
receive any packet.
• Tx Good Packet: The counts of transmitting good packets via this port.
• Tx Bad Packet: The counts of transmitting bad packets (including undersize [less
than 64 octets], oversize, CRC Align errors, fragments and jabbers packets) via this
port.
than 64 octets], oversize, CRC Align errors, fragments and jabbers packets) via this
port.
• Rx Good Packet: The counts of receiving good packets via this port.
• Rx Bad Packet: The counts of receiving good packets (including undersize [less
than 64 octets], oversize, CRC error, fragments and jabbers) via this port.
than 64 octets], oversize, CRC error, fragments and jabbers) via this port.
• Tx Abort Packet: The aborted packet while transmitting.
• Packet Collision: The counts of collision packet.
• Packet Dropped: The counts of dropped packet.
• Rx Bcast Packet: The counts of broadcast packet.
• Rx Mcast Packet: The counts of multicast packet.
• Click ‘Clear button to clear the information.
• Click ‘Clear button to clear the information.
Figure C.32: Port Statistics
C.2.2 Port Control
In Port control, you can view every port status that depends on user setting and the
negotiation result.
negotiation result.
• Port No.: select the port that you want to configure.
• State: current port status. The port can be set to disable or enable mode. If the port
setting is disable then will not receive or transmit any packet.
setting is disable then will not receive or transmit any packet.
• Speed/Duplex: set the port link speed.
• Duplex: set full-duplex or half-duplex mode of the port.
• Flow Control: set flow control function is Symmetric or Asymmetric in Full Duplex
mode. The default value is Symmetric.
mode. The default value is Symmetric.