Edimax Technology PS-1206MF 用户手册

23 

Wireless Configuration Double-click the “Wireless” button. Enter user name 

and password then the wireless configuration window will popup. The default 

username and password are ‘’admin’’ and ‘’1234’’, and you are into the steps of 

‘’Infrastructure Mode”.   

 

 

 

Function: You can select “Auto”, Enable” or “Disable” to manually configure 

the wireless function.   

 

Auto – “Auto” is the default setting of the MFP Server. At this mode, the MFP 

Server will automatically decide to enable or disable the wireless function. 

When the MFP Server starts up, it will auto-detect if the LAN port is connected 

to an active network by an Ethernet cable. If this is the case, the MFP Server 

will run in Ethernet mode. If the MFP Server is not connected to an active 

network by Ethernet cable, the MFP Server will run in wireless LAN mode.   

 

Users can plug the Ethernet cable into the MFP Server, after configuring the 

MFP Server features and wireless settings; they can unplug the Ethernet cable 

to enable the wireless connection. This makes the configuration much easier 

without creating the wireless connection in advance. 

 

Note: After you have set the wireless function, please remove the Ethernet 

cable and then re-plug the power jack of the MFP Server to activate the