Lantronix EDS8PS 用户手册
10: Terminal and Host Settings
EDS User Guide
77
Network Terminal Configuration
To configure menu features applicable to CLI access via the network:
1. Select Terminal on the menu bar, if you are not already in the Terminal web page.
2. Select Network at the top of the page. The Configuration submenu is automatically selected.
2. Select Network at the top of the page. The Configuration submenu is automatically selected.
The Terminal Configuration page appears for the network.
Figure 10-3 Terminal on Network Configuration
3. Enter or modify the following settings:
Table 10-4
Terminal on Network Configuration
4. Click Submit to save changes.
Terminal on Network
Configuration Settings
Configuration Settings
Description
Terminal Type
Enter text to describe the type of terminal. The text will be sent to a host via IAC.
Note:
IAC means, “interpret as command.” It is a way to send commands over
the network such as send break or start echoing.
Login Connect Menu
Select the interface to display when the user logs in. Choices are:
Enabled
Enabled
= shows the Login Connect Menu.
Disabled
= shows the CLI
Exit Connect Menu
Select whether to display a choice for the user to exit the Login Connect Menu
and reach the CLI. Choices are:
Enabled
Enabled
= a choice allows the user to exit to the CLI.
Disabled
= there is no exit to the CLI.
Echo
Applies only to Connect Mode Telnet connections, not to Accept Mode. Only
disable Echo if your terminal echoes, in which case you will see double of each
character typed.