HP (Hewlett-Packard) ML100 用户手册

Server setup 10

WARNING:

To reduce the risk of personal injury or damage to the equipment, be sure that:

•

The leveling jacks are extended to the floor.

•

The full weight of the rack rests on the leveling jacks.

•

The stabilizing feet are attached to the rack if it is a single-rack installation.

•

The racks are coupled together in multiple-rack installations.

•

Only one component is extended at a time. A rack may become unstable if more than one

component is extended for any reason.

WARNING:

To reduce the risk of personal injury or equipment damage when unloading a rack:

•

At least two people are needed to safely unload the rack from the pallet. An empty 42U rack

can weigh as much as 115 kg (253 lb), can stand more than 2.1 m (7 ft) tall, and might
become unstable when being moved on its casters.

•

Never stand in front of the rack when it is rolling down the ramp from the pallet. Always handle

the rack from both sides.

Installing hardware options

Install any hardware options before initializing the server. For options installation information, refer to the
option documentation. For server-specific information, refer to "Hardware options installation (on page

)."

Powering up and configuring the server

To power up the server, press the Power On/Standby button.
For detailed information on configuring the server, see the server installation sheet.

Installing the operating system

To operate properly, the server must have a supported operating system. For the latest information on

supported operating systems, refer to the HP website (

http://www.hp.com/go/supportos

To install an operating system on the server, insert the operating system CD into the CD-ROM drive and

reboot the server. This process may require you to obtain additional drivers from the Easy Set-up CD or the
support CD shipped with the server, or the CD that shipped with the option. The drivers may have updates