Fujitsu RX330 用户手册
44
Operating manual
RX330 S1
Installing/removing the server in/from the rack
Hardware installation
Figure 7: Inserting the server
V
CAUTION!
At least two people are needed to position the server in the rack.
Ê
Fully extend the fitted telescopic rails (1). They must click into place so that
they can no longer be moved.
they can no longer be moved.
Ê
Push the prepared server into the rails that are attached to the rack until the
server rails engage (2).
server rails engage (2).
I
Ensure that the server is inserted horizontally and is not tilted.
Ê
Press the safety springs in on both sides (3).
Ê
Gently push the server as far as it will go into the rack (4).
Ê
Fasten the server to the rack (5) using the two knurled screws (front panel).
To remove the server, follow this procedure in reverse.
1
1
2
3
4
4
5
5