Fujitsu RX330 用户手册
RX330 S1
Operating manual
73
Hot-plug components
Hot plug hard disk drives
8.2
Hot plug hard disk drives
Up to six hot-plug hard disk drives can be installed in the PRIMERGY RX330 S1
Server.
Server.
The hard disk drives which can be ordered for the PRIMERGY RX330 S1 are
supplied already mounted in an installation frame so that defective hard disk
drives can be replaced and new drives can be added during operation. The
HDD drive and installation frame together make up the HDD module.
supplied already mounted in an installation frame so that defective hard disk
drives can be replaced and new drives can be added during operation. The
HDD drive and installation frame together make up the HDD module.
V
CAUTION!
●
The HDD must not be removed from the installation frame by anyone
except a service technician.
except a service technician.
●
The HDD modules (drives) must all be marked clearly so that they
can be put back in their original places after an upgrade. If this is not
done, existing data can be lost.
can be put back in their original places after an upgrade. If this is not
done, existing data can be lost.
●
The hot-plug function is only possible in conjunction with a corre-
sponding RAID configuration.
sponding RAID configuration.
Further information about RAID configuration or the RAID level can
be found in the RAID controller documentation (see
be found in the RAID controller documentation (see
V
CAUTION!
Hybrid operation using both SAS and SATA2 hard disk drives is not
supported.
supported.