Fujitsu RX900 S1 用户手册
RX900 S1
Maintenance Manual
165
Expansion cards and BBU
Ê
Press the green button (1).
Ê
Lift the handle (2) to disconnect the PCI Riser (PCIR) from the baseboard.
Ê
Pull the PCIR up and out by using the handle (3).
8.10.4 Removing the Modular RAID controller
Figure 95: Removing the Modular RAID controller from the slot
Ê
Remove the slot lock by pulling the green handle upward (1), pushing the
plastic part down (2), and lifting the slot lock (3).
plastic part down (2), and lifting the slot lock (3).
Ê
Carefully pull the Modular RAID controller out of the lot (4).
Ê
Disconnect the SAS cables from the Modular RAID controller ports.
/
0
1
2
3
3