Fujitsu TX200 S6 用户手册
TX200 S6
Operating Manual
23
Preface
ServerView Installation Manager
You can configure the PRIMERGY server quickly and precisely with the
ServerView Installation Manager software provided. User-guided menus are
available for installing the server operating system (for further details see
section
ServerView Installation Manager software provided. User-guided menus are
available for installing the server operating system (for further details see
section
).
Service and support
PRIMERGY servers are easy to maintain and modular, thus enabling quick and
simple maintenance.
simple maintenance.
The handles and locks (touch point) used to exchange components are colored
green to ensure simple and immediate recognition.
green to ensure simple and immediate recognition.
In order to prevent the components from being damaged by incorrect handling
when they are being installed and removed, the areas of all components that
can be touched without damaging them are also marked green.
when they are being installed and removed, the areas of all components that
can be touched without damaging them are also marked green.
PRIMERGY diagnostic LEDs fitted on the system board show which component
(memory module, processor, fan or expansion card) is not functioning properly.
(memory module, processor, fan or expansion card) is not functioning properly.
The Flash EPROM program supplied with the Fujitsu utilities supports a fast
BIOS update.
BIOS update.
With the iRMC S2 (integrated Remote Management Controller) on the system
board, the PRIMERGY TX200 S6 server can also be maintained and serviced
remotely. This enables remote diagnosis for system analysis, remote
configuration and remote restart should the operating system or hardware fail.
board, the PRIMERGY TX200 S6 server can also be maintained and serviced
remotely. This enables remote diagnosis for system analysis, remote
configuration and remote restart should the operating system or hardware fail.