Fujitsu Siemens Computers BS2000/OSD 用户手册

42

U25339-J-Z126-1-7600

Standard processing in SVP mode

You assign a job to the SVP by invoking the relevant frame, selecting the desired function,
and specifying the required parameters. To select a function or specify a parameter, you
must enter the alphanumeric characters shown in the frame in the input fields marked by an
arrow (

=>

). The input fields can be selected with the tab key

. Once you have entered all

the functions and parameters assigned to a job, press the

 key. In several frames,

functions can also be initiated with the SVP function keys.

Instead of selecting a function, you can also enter a command in the command input line in
all frames (screen line 24) and assign a job to the SVP in this way. Frames can also be
selected using the

FRËFrame-ID

, e.g.

FR ML

 (to switch to the MODE SELECTION FRAME).

A command entered in line 24 takes priority over a selected frame function.

The input is disturbed by the output of messages in line 23 (e.g.

SET TIME COMMAND

COMPLETED

). The

  key suppresses output of the message for one minute. In this time the

frame can be filled out and dispatched with

.

An EMDS keyboard mask, which must be ordered separately, is used to operate the
SVP frames:

Order number: U20076-J-Z148-1
EMDS (SINIX Open Desktop) as of V2.1 for DSS 97801-5xx:
Keyboard masks - 6 strips

The following diagram shows the position and labelling of the SVP function keys on the
EMDS keyboard mask:

You can activate various functions on the SVP frames with the help of the P keys

 to

,

the keys

 to

 and

 to

.

ENTER

K1

ENTER

P1

P20

K1

K3

F1

F3