Fujitsu N800 用户手册
102
U41243-J-Z156-1-76
Boards in hot-plug PCI slot
System expansions
Ê
Start the PCI hot-plug utility from the Control Panel.
Ê
Select the board you want to swap.
Ê
Select the
Remove
function.
Ê
Wait until the message
Remove the adapter then click OK
is displayed.
The power LED (green) must be dark and the warning LED (yellow) must be
blinking.
blinking.
Ê
Remove the hot-plug PCI cover (see the section “Removing/mounting the
PCI bus hot-plug cover” on page 87).
PCI bus hot-plug cover” on page 87).
Ê
Remove any cables connected to the board.
Figure 27: Removing the PCI board
Ê
Release the PCI locking mechanism and remove the board.
Ê
Confirm the message
Remove the adapter then click OK
with OK.