Fujitsu MX130 S2 用户手册
![Fujitsu](https://files.manualsbrain.com/attachments/6c4642b33d2edbd09f94719c20a133aa0e862902/common/fit/150/50/80a45702a21fefb1823bce6851e87db450dccf7792cb572ebc8a90330a68/brand_logo.png)
100
Upgrade and Maintenance Manual
MX130
S2
HDDs and accessible drives
Ê
Connect cables to the HDD.
1
Power cable connector P2 (see
)
2
SATA cable T26139-Y4028-V153
7.7.4
Concluding steps
Perform the following procedures to complete the task:
Ê
Close the front cage as described in section
Ê
Follow all procedures described in section
Ê
Please observe the notes on RAID rebuild in section
.
7.8
Removing 3.5-inch HDD out of 5.25-inch
dummy cover
dummy cover
7.8.1
Required tools
●
Preliminary and concluding steps: tool-less
●
Installing a 3.5-inch HDD
– Phillips PH2 / (+) No. 2 screw driver
7.8.2
Preliminary steps
Before removing a 3.5-inch HDD, perform the following steps:
Ê
Follow all procedures described in section
Ê
Open the front cage as described in section
Ê
Locate the correct drive bay as described in section