Fujitsu MX130 S2 用户手册
![Fujitsu](https://files.manualsbrain.com/attachments/6c4642b33d2edbd09f94719c20a133aa0e862902/common/fit/150/50/80a45702a21fefb1823bce6851e87db450dccf7792cb572ebc8a90330a68/brand_logo.png)
MX130 S2
Upgrade and Maintenance Manual
165
Expansion cards
9.2.1.5
Connecting cables to the expansion card
Ê
If applicable, connect internal cables to the expansion card.
I
For a complete cabling overview, please refer to section
9.2.1.6
Concluding steps
Perform the following procedures to complete the task:
Ê
Follow all procedures described in section
.
Ê
After installing or replacing a Modular RAID controller, update the firmware
as described in section
as described in section
Ê
In order to configure an expansion card that has been installed or replaced,
the card’s Option ROM has to be enabled in the system board BIOS. If
applicable, proceed as described in section
the card’s Option ROM has to be enabled in the system board BIOS. If
applicable, proceed as described in section
.
Ê
If the new expansion card replaces a previously installed network adapter,
inform the customer about changed MAC addresses. For further
information, refer to section
inform the customer about changed MAC addresses. For further
information, refer to section
.
Ê
If BitLocker functionality is used and has been disabled before starting the
maintenance task, re-enable BitLocker as described in section
maintenance task, re-enable BitLocker as described in section
9.2.2
Removing expansion cards
9.2.2.1
Required tools
●
Preliminary and concluding steps: tool-less
●
Removing expansion cards: tool-less
Upgrade and Repair Units (URU)
Average task duration: 5 minutes