Fujitsu MX130 S2 用户手册
![Fujitsu](https://files.manualsbrain.com/attachments/6c4642b33d2edbd09f94719c20a133aa0e862902/common/fit/150/50/80a45702a21fefb1823bce6851e87db450dccf7792cb572ebc8a90330a68/brand_logo.png)
MX130 S2
Upgrade and Maintenance Manual
185
Main memory
Figure 116: Removing memory modules
Ê
Eject the desired memory module by pressing out the securing clips at each
end of the memory module connector.
end of the memory module connector.
Ê
Remove the ejected memory module.
10.3.4 Concluding steps
Perform the following procedures to complete the task:
Ê
Follow all procedures described in section
.
Ê
If available, update the system board BIOS to the latest version as described
in section
in section
.
Ê
If BitLocker functionality is used and has been disabled before starting the
maintenance task, re-enable BitLocker as described in section
maintenance task, re-enable BitLocker as described in section