Raritan Computer SX32 用户手册
74 D
OMINION
SX
I
NSTALLATION AND
O
PERATIONS
M
ANUAL
Password = frst256
Port# = 2
$ SSH -l dominion -t 192.168.51.225 "sconsole -u admin -a pass123 -p 2"
Authenticating [admin].....Authenticated.
User Type [Administrator]
UserName [admin]
Number Of Accessible Ports = 6
Port# PortName
[1] Port1
[2] Port2-SUN
[3] Port3
[4] Port4
[5] Port5
[6] Port6
Serial Port 2 Connected.
Escape character is Ctrl-\
User [admin] Is Now Master [Write Access Allowed] For This Port.
Port# = 2
$ SSH -l dominion -t 192.168.51.225 "sconsole -u admin -a pass123 -p 2"
Authenticating [admin].....Authenticated.
User Type [Administrator]
UserName [admin]
Number Of Accessible Ports = 6
Port# PortName
[1] Port1
[2] Port2-SUN
[3] Port3
[4] Port4
[5] Port5
[6] Port6
Serial Port 2 Connected.
Escape character is Ctrl-\
User [admin] Is Now Master [Write Access Allowed] For This Port.
Note: After the serial target is connected, the escape character can be used to exit from the serial target
session and come back to “Command>” prompt for an interactive session.
session and come back to “Command>” prompt for an interactive session.
Figure 71 Sample SSH Session Screen
Port Sharing Using SSH
It is possible for SSH users to share ports with other authenticated and authorized users, regardless of
whether they are SSH users or SSL (GUI) users,. This capability is used for training or for troubleshooting
applications.
SSH users are informed if they have Write access or Read Only access at any point during the port-sharing
session. These notifications are real-time.
SSH users can explicitly request write permission to a port by issuing the command:
con 2 w (or the full command console_cmd 2 w).
whether they are SSH users or SSL (GUI) users,. This capability is used for training or for troubleshooting
applications.
SSH users are informed if they have Write access or Read Only access at any point during the port-sharing
session. These notifications are real-time.
SSH users can explicitly request write permission to a port by issuing the command:
con 2 w (or the full command console_cmd 2 w).
Important: Only Administrators and Operators have capabilities to obtain write access