Raritan Computer SX48 用户手册

36 D

OMINION 

SX

 

I

NSTALLATION AND 

O

PERATIONS 

M

ANUAL

 

Overview 
The Network configuration screen provides an area for Administrators to define both the network and 
modem (optional) settings for the unit. 

 

Some Dominion SX units come equipped with a 56Kbps (bits per second) modem, which allows dial-in 
access to the unit from virtually any location in the world. On other Dominion SX units, there is a 
connector on the rear panel for a user-supplied external modem. Client computers connect to the unit by 
establishing a PPP (Point-to-Point Protocol) link between the client machine and the Dominion SX unit. 
Once the PPP connection is established, the client computer is physically on the same network as the 
Dominion SX unit and can access the unit using Internet Explorer or Netscape browsers.  
There are three requirements for dialing into the unit:  
1.  The phone line to the unit must be connected. 
2.  The modem / PPP connection settings must be configured. 
3.  The dial-up networking software on the user’s personal computer must be configured to establish a 

PPP connection from the client computer to the unit. 

 

•

  IP address: IP address for the unit 

•

  IP subnet mask: Subnet mask to be used when deployed in the network 

•

  IP gateway: Gateway that the unit uses to communicate with other systems that are not on the same 

subnet 

•

  Dominion SX Unit Name: Name to be associated with the unit, 64 characters in length. Valid 

characters are A-Z, a-z, -, _, 0-9, no spaces or special characters allowed 

•

  Terminal Type: Type of terminal supported; default is VT100 

•

  Port Address: Port address to be used by the unit when communicating with other systems; the default 

port address is 51000, but can also be set to any value in the range of 1024-65536 (please verify this 
value with your firewall administrator) 

 
Click on the [Update] button to load all the changes. 
Click on the [Save] button to make the changes permanent.