Raritan Computer SX8 用户手册

C

HAPTER 

2:

 

I

NSTALLATION

 

9 

 

After the Initial Software Configuration phase, a Dominion SX unit is configured for operation on the LAN. 

 

 

 

 

 

 

 

1.  Make sure you have an allocated Ethernet cable connected to the network for use with the unit. 
2.  Physically mount the unit in an ergonomically sound manner.  
3.  Connect the LAN cable to the primary LAN connection on the back of the chassis. Connect and/or 

verify that the other end of the cable is connected to the proper network. If the unit has a failover 
module, connect the secondary network LAN connection as well. 

4.  Connect the female end of the external power cord to the back of the chassis.  
5.  Serial Connection to Target Devices: This manual contains detailed information on connecting the 

Dominion SX unit to the console port of target devices.  

6.  Modem Connection (optional): Connect a phone line to the modem port. Remember to write down 

the phone number for this line, as it will be necessary later when the user configures a client for dialup 
networking. 

7.  Connect the male end of the external power cord to the power supply outlet and power ON the 

Dominion SX unit. 

8.  Perform a quick connectivity check by connecting to the device using either IE or Netscape. In the 

address line, enter https://<IPAddress> where IPAddress is the IP address of the unit as previously 
configured. The login display should appear verifying that the unit has been properly configured and 
can be accessed from the network. 

9.  Enter the Configuration window and enter the various configuration parameters for each console port. 

Enter specific operational parameters for the unit (please see Chapter 4: Console Features for 
additional information). 

 
 
 

Dominion SX Unit 

 
 
Installation 
Computer 

Browser 

LAN 

Ethernet 

Connection