Raritan Computer SX4 用户手册
C
HAPTER
4:
C
ONSOLE
F
EATURES
37
The parameters for configuring modem access include:
PARAMETER
DESCRIPTION
Enable Modem
Configures the modem to answer calls
PPP Server IP
IP address of the PPP server (Dominion SX unit)
PPP Client IP
IP address of the PPP client (remote computer)
Configure Modem Parameters
1. Check the Enable Modem box.
2. Enter the PPP Server IP – the IP address used by the client to access Dominion SX once the modem
1. Check the Enable Modem box.
2. Enter the PPP Server IP – the IP address used by the client to access Dominion SX once the modem
connection is established.
3. Enter the PPP Client IP – the IP address assigned by Dominion SX to the client in order for the
connection to be established.
4. Click on the [Update] button.
5. Click on the [Save] button.
The Modem Status field indicates one of two states:
5. Click on the [Save] button.
The Modem Status field indicates one of two states:
•
Running: The modem is configured and is operational.
•
Stopped: The modem is not operational.
The [Initialize Modem] button can be used to reset the modem if it is running but not operating properly.
Note: Be sure to verify the above information with your Network Administrator prior to configuring the
unit.
unit.
When using Microsoft Windows, once Microsoft dial-up networking has established a connection, a
network is constructed with the parameters specified in the Modem Settings area of the Network
configuration window. The client computer now can be connected to two separate networks. These
networks must have distinct IP addresses if modem access is to function properly. The second network
established by the PPP connection has only two devices, the Dominion SX unit with IP address PPP Server
IP and the client computer with IP address PPP Client IP.
Please see Appendix G: Modem Configuration for additional information on configuring Microsoft dial-
up networking on Windows 2000, Windows 98, and Windows NT.
network is constructed with the parameters specified in the Modem Settings area of the Network
configuration window. The client computer now can be connected to two separate networks. These
networks must have distinct IP addresses if modem access is to function properly. The second network
established by the PPP connection has only two devices, the Dominion SX unit with IP address PPP Server
IP and the client computer with IP address PPP Client IP.
Please see Appendix G: Modem Configuration for additional information on configuring Microsoft dial-
up networking on Windows 2000, Windows 98, and Windows NT.