Quatech HD500 用户手册
AirborneDirect™ Users Guide
Quatech, Inc.
100-8510-110
2/21/2011
41
14.0 Configuring Device
– Enterprise/Industrial Ethernet
The following instructions describe how access the AirborneDirect
™ Ethernet device and
web interface for initial configuration of the unit.
Table 18 - ET-DP5XX/IN5XXX Accessing the Web Interface
1
Open the AirborneDirect™ packaging and locate the Install CD.
2
Place the CD in the CD/DVD drive of the laptop or desktop you will be using to configure the
AirborneDirect™ device. Follow the on screen directions for installation of the appropriate device
software and documentation.
AirborneDirect™ device. Follow the on screen directions for installation of the appropriate device
software and documentation.
3
Connect the Ethernet cable on ABDG to an Ethernet port on the laptop or desktop system.
4
Apply power to the ABDG-ET-DP5XX/IN5XXX.
5
The unit will boot and display one of the following LED patterns:
ABDG-ET-DP5XX
Associated (Open Network)
Not Associated
POWER:
Green
Green
LINK :
Green
Red (Periodic Blinking)
COMM:
Red
Red
ABDG-ET-IN5XXX
COMM:
COMM:
Off
LINK :
Off
POST:
Orange
POWER:
Blue
6
Run the Airborne Management System application. This was installed during the CD installation and a
menu item will be found in the Airborne folder located in the programs directory of your system.
menu item will be found in the Airborne folder located in the programs directory of your system.
When the application opens the following dialog will be displayed:
Select Group Name: manuf and enter Group Password: dpac