ZyXEL Communications nsa325 业主指南

Chapter 3 NAS Starter Utility for NSA210

Media Server User’s Guide

Use this screen to view the NSAs in your network. The NSA’s Server Name. The default is ‘nsa’ 
followed by the number of your model (‘nsa210’ for example). See 

 for how 

to change it to a more recognizable one in your network.

Start the NAS Starter Utility (click the icon in your Desktop or in Start > Programs > ZyXEL > 
NAS Starter Utility). The first time you open the NAS Starter Utility the discovery screen appears 
as follows. 

Figure 16   NAS Discovery

The following table describes the labels in this screen.

Table 5   NAS Discovery

Refresh

Click this to refresh the screen. The NAS Starter Utility does not automatically refresh.

Hostname

This is the server name you configured for the NSA. If you have more than one NSA in 
your network, it is recommended that you give each one a unique name for identification 
purposes.

If you have several NSAs connected to your computer/network, hover your mouse over 
the host name to view the details of each device. A box pops up containing details about 
the NSA. 

Hostname shows the NSA’s configured server name.

IP shows the NSA’s current IP address.

Model ID shows the NSA’s model name.

Firmware Version shows the version of firmware the NSA is currently using.

Status shows whether the NSA is Online, Unreachable, Configuring, or Config 
Failed.