Toshiba PT930 用户手册
O
PERATING
B
ASICS
4-27
Connecting LAN cable
CAUTION: The computer must be configured properly before connecting
to a LAN. Logging onto a LAN using the computer’s default settings
could cause a malfunction in LAN operation. Check with your LAN
administrator regarding set-up procedures.
to a LAN. Logging onto a LAN using the computer’s default settings
could cause a malfunction in LAN operation. Check with your LAN
administrator regarding set-up procedures.
If you are using Gigabit Ethernet LAN (1000 megabits per second, 1000BASE-T), be
sure to connect with a CAT5 cable or a CAT5E cable. (A CAT5E cable is
recommended.) You cannnot use a CAT3 cable.
sure to connect with a CAT5 cable or a CAT5E cable. (A CAT5E cable is
recommended.) You cannnot use a CAT3 cable.
If you are using Fast Ethernet LAN (100 megabits per second, 100BASE-TX), be
sure to connect with a CAT5 cable. You cannot use a CAT3 cable.
sure to connect with a CAT5 cable. You cannot use a CAT3 cable.
If you are using Ethernet LAN (10 megabits per second, 10BASE-T), you can
connect with either a CAT5 or a CAT3.
connect with either a CAT5 or a CAT3.
To connect the LAN cable, follow the steps below.
1.
Turn off the power to the computer and to all external devices connected to
the computer.
the computer.
2.
Plug one end of the cable into the LAN jack. Press gently until you hear the
latch click into place.
latch click into place.
Figure 4-13 Connecting the LAN cable
3.
Plug the other end of the cable into a LAN hub connector. Check with your
LAN administrator before connecting to a hub.
LAN administrator before connecting to a hub.
LAN