Toshiba PT930 用户手册
User's Manual
7-6
HW S
ETUP
CAUTION: Do not install or remove an optional memory module while
Wake-up on LAN is enabled.
Wake-up on LAN is enabled.
NOTE: The Wake-up on LAN function consumes power even when the
system is off. Leave the AC adaptor connected while using this feature.
system is off. Leave the AC adaptor connected while using this feature.
Built-in LAN
This feature enables or disables the Built-in LAN.
Enabled
Enables Built-in LAN functions. (Default)
Disabled
Disables Built-in LAN functions.
Device Config
Device Configuration
This option lets you set the device configuration.
Setup by OS
Operating system sets devices that it can control. (Default)
All Devices
BIOS sets all devices.
Parallel/Printer
This tab lets you set the Printer Port Type. Use the Windows Device Manager to
make settings for the Parallel port.
make settings for the Parallel port.
Parallel Port Mode
The options in this tab are
ECP
and
Standard Bi-directional
.
ECP
Sets the port type to Extended Capabilities Port (ECP). For
most printers, the port should be set to
most printers, the port should be set to
ECP
. (Default)
Standard
This setting should be used with some other parallel
Bi-directional
devices.