Toshiba PT930 用户手册
User's Manual
8-14
O
PTIONAL
D
EVICES
Figure 8-15 Removing the memory module
6.
Follow the instructions 11 through 15 in “Installing memory module”.
Hard disk drive pack
An extra HDD expands the flexibility of your system and lets you carry your data
without carrying the computer.
without carrying the computer.
NOTE: Use a point size 0 Phillips screwdriver.
Removing the HDD pack
To remove the HDD pack, follow the steps below and refer to figures 8-16 and 8-17.
1.
Set the computer to boot mode and turn off the power.
2. Disconnect the AC adaptor and all external cables connected to the computer.
3.
Remove the main battery and optional secondary battery when it is used.
4.
Turn the computer upside down and remove one screw securing the HDD
cover.
cover.
5.
A small row of ridges mark latches securing the cover. Press on these ridges
until you hear a click.
until you hear a click.
6. Press on the arrows and lift the cover up and out to remove it.