Wasp Bar Code WWS500 用户手册
Chapter 5
29
BLUETOOTH SETTINGS
See Chapter 3 for step-by-step setup instructions.
Scan the “Set Connection” barcode before pairing up the WWS500 Freedom
Scanner and the Bluetooth dongle/internal Bluetooth adaptor.
Scanner and the Bluetooth dongle/internal Bluetooth adaptor.
Connect and Disconnect
1 Minute
Bluetooth Power Off Settings
Set Connection
5 Minutes
3 Minutes
10 Minutes
Scan the “Disconnect Bluetooth” barcode if you are moving the scanner to a
different PC or Bluetooth dongle/adaptor. After scanning this barcode you
will need to scan the factory default barcode on page 7.
different PC or Bluetooth dongle/adaptor. After scanning this barcode you
will need to scan the factory default barcode on page 7.
Disconnect Bluetooth
This option controls the length of time that the Bluetooth radio will stay
powered on when not in use.
powered on when not in use.