Wasp Bar Code WWS850 用户手册

 

23

6. Click 

PC Remote Commander icon. 

       

 

 

7. Click Yes Button. 

       

 

 

 

8.  When the green arrow icon is displayed, the connection is ready. 

       

 

 

 

No

 

24

 
This section describes user configurable parameters that are pertaining to barcode 
symbologies. 

 

•  Standard / Full ASCII Code 39: User can choose to read either Standard 

Code 39 or Full ASCII Code 39 by configuring this parameter. 

•  Start/Stop Transmission: This parameter specifies whether the start/stop 

characters of Code 39 are included in the data being transmitted. 

•  Checksum Verification: This parameter specifies whether the scanner will 

perform checksum verification when decoding barcodes. If the checksum is 
incorrect, the barcode will not be read. 

•  Checksum Transmission: This parameter specifies whether the checksum 

characters are included in the data being transmitted. 

 

 
For Italy /French Pharmacode, there is always a checksum character included in the 
barcode. So the checksum verification is always performed when decoding these 
symbologies. User though can choose whether the checksum character is to be 
transmitted or not. The start / stop transmission of this code shares the same setting 
of Code 39. 

•  Checksum Transmission: This parameter specifies whether the checksum 

character is included in the data being transmitted. 

 

•  Start / Stop Selection: This parameter provides the readability of all 2 of 5 

symbology variants. For example, flight tickets actually use an Industrial 25 
barcode but with Interleave 25 start / stop. In order to read this barcode, the 
start / stop selection parameter of Industrial 25 should set to ‘Interleave 
25. 

•  Checksum Verification: This parameter specifies whether the scanner will 

perform checksum verification when decoding barcodes. If the checksum is 
incorrect, the barcode will not be read.