Motorola MS4407 用户手册

11 - 46 Symbol MS4404/MS4407 Integration Guide

To enable or disable Codabar, capture the appropriate bar code below. 

The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s) 
the code contains. Set lengths for Codabar to any length, one or two discrete lengths, or lengths within a specific 
range.

One Discrete Length - Select this option to decode only Codabar symbols containing a selected length. 
Select the length using the numeric bar codes in 

. For example, to decode 

only Codabar symbols with 14 characters, capture Codabar - One Discrete Length, then capture 1 followed 
by 4. To correct an error or to change the selection, capture Cancel on

 page D-3.

Two Discrete Lengths - Select this option to decode only Codabar symbols containing either of two 
selected lengths. Select lengths using the numeric bar codes in 

. For 

example, to decode only Codabar symbols containing either 2 or 14 characters, select Codabar - Two 
Discrete Lengths, then capture 0, 2, 1, and then 4. To correct an error or to change the selection, 
capture Cancel on

.

Length Within Range - Select this option to decode a Codabar symbol with a specific length range. 
Select lengths using numeric bar codes in 

For example, to decode 

Codabar symbols containing between 4 and 12 characters, first capture Codabar - Length Within Range. 
Then capture 0, 4, 1, and 2 (single digit numbers must always be preceded by a leading zero). To correct an 
error or change the selection, capture Cancel on

Any Length - Capture this option to decode Codabar symbols containing any number of characters within 
the imager capability.