Motorola MS4407 用户手册

7 - 12 Symbol MS4404/MS4407 Integration Guide

Select whether to use internal LED illumination (provided by the Symbol MS440X), external illumination (provided 
outside the Symbol MS440X), or both.

This parameter only applies for decoding if 

 is enabled, or for image capture if 

 is enabled. If Decoding Illumination or Image Capture Illumination is 

disabled, all illumination is off for that mode, regardless of this LED Illumination setting.

This parameter sets the amount of time the imager remains in Snapshot Mode. The imager exits Snapshot Mode 
upon a trigger event, or when the Snapshot Mode Timeout elapses. To set this timeout value, capture the bar code 
below followed by a bar code from 

. The default value is 0 which represents 30 

seconds; values increment by 30. For example, 1 = 60 seconds, 2 = 90 seconds, etc.