Epson PRO 4800 用户手册

  Slide the black paper stop off the end of  

the spindle.

 To use paper with a 2-inch core, remove the 

gray adapters from the paper stops at each end.  
See your Printer Guide for details. 

  Position the roll as shown, then slide it onto  

the spindle.

 

  Slide the black paper stop back onto the spindle and 

insert it firmly into the end of the roll.

  Open the roll paper cover.

  Place the roll paper in the printer as shown. (The 

black end of the spindle goes on the left.)

 

  Make sure the printer is turned on, then press the 

 Paper Source button until the   or 

 icon 

appears.

Alignment mark

  Release the paper lever.

 

  Hold both sides of the paper and feed it into  

the slot. Pull it all the way to the end of the  
paper tray.

 

Using the end of the spindle, roll the paper  
until it is aligned with the mark next to the  
arrow. Then return the paper lever to the  
secured position.   

   

The printer automatically feeds the paper to the  
printing position.

  Raise the roll paper support on top of the  

paper tray. Then close the roll paper cover.

 

 

 
 
 

 To prevent creasing the paper, remove it 

from the paper path and roll it up when you’re not 
printing.

CPD19587_Antr_QRGins.indd   1

5/9/05   4:44:13 PM