Canon 800II 用户手册

54

If a document cannot be scanned correctly, an error message may be displayed. Check the

type of error and deal with the error as described below.

Solution 1

The computer does not recognize the scanner. Check that the PC and scanner

are correctly connected.

Solution 2

This message is sometimes displayed even when the PC does recognize the

scanner. In this event, the cause is probably that the SCSI is not suitable for the

PC. This error message can sometimes be cancelled by setting synchronous

transmission in the scanner to OFF. Contact an authorized Canon service cen-

ter for information on the scanner’s synchronous transmission settings.

Solution

An illegal value was specified as one of the scanner settings in the Scanner

Settings dialog box or Add on Settings dialog box. Change the setting to a

valid value.

Solution

Follow the on-screen directions and switch the scanner ON and then OFF again.

Solution

There is no film loaded in the scanner. Load a film and try scanning again.

Solution

The scanner cannot perform a new scan because it is processing other data or

because the search parameter is incorrect. Check the status of the scanner

and search unit.

Solution

One or more of the scanner settings is invalid. Change the settings and try

scanning again.