Motorola WS 2000 with AP 300 用户手册
Configuration Guide
PN: 1725-36066-001_D.doc
8
Configuring the Wireless Switch from
the Default Configuration
the Default Configuration
Radio settings: The SpectraLink Wireless Telephones use an
802.11b radio; therefore VIEW Certification testing was done with
the 802.11b mode only and not the b/g mode.
802.11b radio; therefore VIEW Certification testing was done with
the 802.11b mode only and not the b/g mode.
Commands
Default Settings
VIEW Tested Settings
Beacon-interval 100
100
*
DTIM-period 10
3
*
BG mode
B and G
B only *
Power level
20 dBm
20 dBm
Channel 1
1
Rates
1, 2, 5.5, 11
1, 2, 5.5, 11
Short preamble
Disabled
Disabled *
* Denotes settings that are required for operation with SpectraLink Wireless
Telephones
Telephones
Configuring radio settings through the CLI
To configure radio settings for the wireless switch, use the following
commands.
commands.
admin>
admin>network
admin(network)>ap
admin(network.ap)>
admin(network.ap)>set beacon intvl 1 100
admin>network
admin(network)>ap
admin(network.ap)>
admin(network.ap)>set beacon intvl 1 100
admin(network.ap)>set dtim 1 3
admin(network.ap)>set rate 1 1,2,5.5,11 1,2,5.5,11
admin(network.ap)>set rate 1 1,2,5.5,11 1,2,5.5,11
Setting the channel
Regulatory parameter values depend on country of operation and
radio type. Refer to documentation for regulatory product
information.
radio type. Refer to documentation for regulatory product
information.