Panasonic DP-1810P 用户手册

下载
页码 60
43
Adding the Toner and Replacing Toner Waste Container (
?
?
?
?
?
)
1
Open the Front Cover.
2
Remove the Toner Waste Container by
slowly pulling it towards the left as
illustrated.
3
Seal the container with the enclosed
cap and dispose of it properly.
4
#
Turn the empty Toner Bottle
counter-clockwise until it stops. The
Arrow mark (Unlocked symbol    )
visible on the end of the Toner
Bottle is aligned with the Arrow
mark on the machine.
Note: To prevent toner spill, ensure
that the key is facing upwards
before removing the toner bottle.
$
Pull the empty Toner Bottle out.
Note: If the bottle will not pull out from
the machine, turn the bottle
slightly in either direction to
release the key and try it again.
Cap
Problem Solving/U13
C
For optimum copy quality use the recommended Panasonic toner. Store toner in a cool
dark place. Do not unseal toner before use. Use it as fast as possible after unsealing.
C
When U13 is displayed the Add Toner Warning Indicator will begin to flash. This message
is to prompt you that the toner bottle is nearly empty (approx. 300-sheets can be printed).
This message will continue to be displayed until the bottle is replaced.  When the count-
down counter reaches 0, the copier will stop operating.  To clear the message and enable
the copier to operate, replace the empty toner bottle with a new one.
ATTENTION
?
J
2
1
Continued on the next page...