Uniden BC246T 用户手册
39
Setting Up Your Scanner
A Look At The Display
The display has indicators that show the scanner's
current operating status. The display information helps
you understand how your scanner operates. The dark
area shown above the icons in this illustration is the text
display area. Information about the currently tuned
frequency appears here.
current operating status. The display information helps
you understand how your scanner operates. The dark
area shown above the icons in this illustration is the text
display area. Information about the currently tuned
frequency appears here.
SYS - shows the currently activated system, appears with
numbers (0-9). The currently active system indicator
flashes.
numbers (0-9). The currently active system indicator
flashes.
ATT - appears when the attenuation feature is turned on
(see “Setting System Attenuation (Trunked Systems
Only)” on Page 70).
(see “Setting System Attenuation (Trunked Systems
Only)” on Page 70).
PRI - appears when the priority feature is turned on (see
“Priority Scan” on Page 48).
“Priority Scan” on Page 48).
- appears when you lock the keypad (see
- alerts you when the battery power gets low.
GRP - shows the currently activated group, appears with
numbers ( - ). The currently active group indicator
flashes.
numbers ( - ). The currently active group indicator
flashes.
AM/FM/NFM - appears to show the type of transmission.
L/O - appears when you manually select a channel you
locked out or a skip frequency.
L/O - appears when you manually select a channel you
locked out or a skip frequency.
- appears when you hold down
to select a
function.
- appears when the scanner is set to a Close Call
feature mode (see “Using the Close Call Feature” on
Page 86).
Page 86).
0 9
F
Func
BC246T Paper OM 062405.fm Page 39 Tuesday, June 28, 2005 10:12 AM