Ricoh Type 480 用户手册
Initial Scanner Setup
98
9
Settings
Scan Settings
This section explains how to set the
defaults for scan settings.
The scan settings consist of the fol-
lowing. For the table about settings
and defaults, see p.95 “Scanner Fea-
tures”.
defaults for scan settings.
The scan settings consist of the fol-
lowing. For the table about settings
and defaults, see p.95 “Scanner Fea-
tures”.
❖
❖
❖
❖ Default Scan Settings
Various basic settings (scan type,
resolution, image density, and
scan size) can be set. You can regis-
ter the scan settings in the same
way as specifying them. For de-
tails, see p.73 “Specifying Scan Set-
tings”.
resolution, image density, and
scan size) can be set. You can regis-
ter the scan settings in the same
way as specifying them. For de-
tails, see p.73 “Specifying Scan Set-
tings”.
• Scan Type
• Resolution
• Image Density
• Scan Size
• Resolution
• Image Density
• Scan Size
❖
❖
❖
❖ Next Original Wait at Off
When scanning multiple pages
into a single file, you can select
[Continuous Wait]
into a single file, you can select
[Continuous Wait]
, [Off], or [Set Wait
Time]
as the standby mode of the
additional original.
Even if you select [Continuous Wait]
or [Set Wait Time], the machine op-
erates as if [Continuous Wait] has
been selected if you select [Next
Original Wait]
Even if you select [Continuous Wait]
or [Set Wait Time], the machine op-
erates as if [Continuous Wait] has
been selected if you select [Next
Original Wait]
on the Scan to Folder
screen.
Note
❒ If [Off] is selected, sending will
start automatically after one
page of original is scanned.
page of original is scanned.
❒ If [Set Wait Time] is selected, en-
ter the wait time in seconds (3-
999) for placing additional orig-
inals with the number keys. If
you load additional originals
within the specified time, scan-
ning is starts. Alternatively, you
can finish scanning and start
sending the scanned file by
pressing the
999) for placing additional orig-
inals with the number keys. If
you load additional originals
within the specified time, scan-
ning is starts. Alternatively, you
can finish scanning and start
sending the scanned file by
pressing the
{{{{#}}}} key within this
time. Once the specified time
has elapsed, transmission starts
automatically.
has elapsed, transmission starts
automatically.
❒ If [Continuous Wait] is selected,
the machine waits for addition-
al originals until the
al originals until the
{{{{#}}}} key is
pressed. Scanning starts when
additional originals are loaded.
You can end scanning and be-
gin sending the scanned file by
pressing the
additional originals are loaded.
You can end scanning and be-
gin sending the scanned file by
pressing the
{{{{#}}}} key.
❒ If a paper misfeed occurs or any
of the following operations is
performed while the machine is
waiting for additional originals,
the countdown stops and does
not start again until the
performed while the machine is
waiting for additional originals,
the countdown stops and does
not start again until the
{{{{#}}}} key
is pressed.
• Changing the settings such
• Changing the settings such
as the scan settings
• Pressing the
{{{{Interrupt}}}} key to
activate the copy mode
❖
❖
❖
❖ Original Orientation Priority
Select the default original loading
orientation. If you always load
originals in the same orientation,
select that orientation as the de-
fault.
orientation. If you always load
originals in the same orientation,
select that orientation as the de-
fault.