Ricoh Type 480 用户手册
Sending Scan Files by E-mail
19
2
Sending Scan Files by E-mail
Procedure for Sending E-mail
A scan file is sent after scan settings
and destinations are specified.
and destinations are specified.
AAAA
Press the
{{{{Scanner}}}} key.
Note
❒ The illustration is an example.
The actual appearance may be
different.
different.
BBBB
Make sure that no previous set-
tings remain.
tings remain.
Note
❒ If a previous setting remains,
press the
{{{{Clear Modes}}}} key.
CCCC
Make settings for the original,
such as orientation and output
tray.
such as orientation and output
tray.
DDDD
Make the scan settings.
Reference
There are two ways to specify
scan settings, as described be-
low:
• Configure each setting for
There are two ways to specify
scan settings, as described be-
low:
• Configure each setting for
scanning. For details, see
p.73 “Specifying Scan Set-
tings”.
p.73 “Specifying Scan Set-
tings”.
• Recall registered settings. For
details, see p.80 “Programs”.
EEEE
If the network delivery scanner
screen appears, switch to the e-
mail screen.
A Press [ ].
B Press [Switch Destination List].
screen appears, switch to the e-
mail screen.
A Press [ ].
B Press [Switch Destination List].
C Press [E-mail].
D Press [Exit].
The e-mail screen appears.
FFFF
Specify the destination.
You can specify the destination in
the following ways:
• Select it from the destination list.
• Specify its registration number.
• Enter the e-mail address directly.
• Search for it in the destination
You can specify the destination in
the following ways:
• Select it from the destination list.
• Specify its registration number.
• Enter the e-mail address directly.
• Search for it in the destination
list.
• Search for it in the LDAP server.
ZZZ606S