Ricoh Type 480 用户手册
Specifying the Orientation and Output Tray of the Original
75
7
Specifying the Orientation and Output
Tray of the Original
Tray of the Original
To correctly orient a scanned image
on the computer display, you must
specify the orientation of the original.
Also, specify the original's output
tray.
on the computer display, you must
specify the orientation of the original.
Also, specify the original's output
tray.
For E-mail, Scan to Folder, and
a Network Delivery Scanner
a Network Delivery Scanner
AAAA
Select [Original Orientation] or [Origi-
nal Exit]
nal Exit]
.
Orientation selection
A Press the key for the same ori-
entation as the actual orienta-
tion of the original.
tion of the original.
Limitation
❒ If you set [Scan Size] to [Auto
Detect]
, or set only the verti-
cal size to [Auto Detect] in
[Custom Size]
[Custom Size]
, orientations
other than
cannot be se-
lected.
❒ Depending on the image size,
originals with orientations
other than
other than
may not be
scanned. If this happens, an
error message appears after
scanning is started.
error message appears after
scanning is started.
Reference
For details about the orienta-
tion of the original and [Origi-
nal Orientation]
For details about the orienta-
tion of the original and [Origi-
nal Orientation]
setting, see
p.109 “Placing Originals”.
The default orientation set-
ting can be changed in [Origi-
nal Orientation Priority]
The default orientation set-
ting can be changed in [Origi-
nal Orientation Priority]
in
[Scanner Features]
. For details,
Specifying the Output Tray for the
Original
Original
A Specify the output tray for the
original.
[
[
]
is suitable as the output
tray for roll paper.
Note
❒ The default setting for the
output tray for the original
can be registered in [System
Settings]
can be registered in [System
Settings]
. For details, see
“System Settings”, General
Settings Guide.
Settings Guide.