Roland LPX-60 用户手册
18
2. Preparing the Machine
2-3 Connecting the Cables
When you connect the cables to the machine, use the included cable clamps and AC adapter holder.
Attaching the Cable Clamps and the AC Adapter Holder
Attach the cable clamps and the AC adapter holder to the back of the machine.
Connecting the Cables
WARNING
Do not use with any electrical power supply that does not meet the ratings displayed
on the AC adapter.
on the AC adapter.
Use with any other power supply may lead to fire or electrocution.
WARNING
Never use any AC adapter and power cord other than the AC adapter and power cord
included with the machine.
included with the machine.
Doing so may lead to fire, electrical shock, or electrocution.
WARNING
Never damage the power cord or pull it with force.
Doing so may tear the cord's insulation, causing an electrical short and resulting in electrical
shock, electrocution, or fire.
shock, electrocution, or fire.
WARNING
Never place any object on the power cord, bend the power cord using excessive force,
or allow the power cord to become deformed.
or allow the power cord to become deformed.
If it becomes deformed, the deformed location may grow hot and cause fire.
WARNING
Do not use with a damaged AC adapter, power cord or plug, or with a loose electrical
outlet.
outlet.
Doing so may lead to fire, electrical shock, or electrocution.
Cable clamps
Peel off the double-
sided tape and attach.
sided tape and attach.
AC adaptor holder
Use two Y screws.
Y screws