TANDBERG 5000 用户手册

  ======== Terminal Settings ========

  Network           Data Port 1

  Restore Defaults  Data Port 2

  TCP/IP Settings   Language

  Previous Menu

This menu provides basic network setup for the unit and should be used when installing the system. In

addition to network setup and data port setup you can also select different languages for the system menus.

  ============= Network =============

  Current Network:

      ISDN-PRI/T1

      External

  ISDN-BRI Settings

  ISDN-PRI/T1 Settings

  External Network Settings

  Previous Menu

Before using the system it is necessary to specify which network to use, and define the settings specific to

that network.

If you want to use your system via ISDN-BRI you should select ‘Current Network: ISDN-BRI’ and enter

the ‘ISDN-BRI Settings’ menu to set the BRI parameters.

If you want to use your system via ISDN-PRI/T1 (optional, USA only) you should select ‘Current Network:

ISDN-PRI/T1’ and enter the ‘ISDN-BRI/T1 Settings’ menu to set the PRI/T1  parameters.

If you want to use special networks and connect using RS449, V.35, X.21 or connect to ISDN via an

external IMUX you should select ‘Current Network: External’ and enter the ‘External Network Settings’

menu to set the External Network parameters.