Cisco Systems 3750E 用户手册
C H A P T E R
11-1
Catalyst 3750-E and 3560-E Switch Software Configuration Guide
OL-9775-02
11
Configuring Interface Characteristics
This chapter defines the types of interfaces on the Catalyst 3750-E or 3560-E switch and describes how
to configure them. Unless otherwise noted, the term switch refers to a Catalyst 3750-E or 3560-E
standalone switch and to a Catalyst 3750-E switch stack.
to configure them. Unless otherwise noted, the term switch refers to a Catalyst 3750-E or 3560-E
standalone switch and to a Catalyst 3750-E switch stack.
The chapter consists of these sections:
•
•
•
•
•
•
•
•
Note
For complete syntax and usage information for the commands used in this chapter, see the switch
command reference for this release and the online Cisco IOS Interface Command Reference,
Release 12.2.
command reference for this release and the online Cisco IOS Interface Command Reference,
Release 12.2.
Understanding Interface Types
This section describes the different types of interfaces supported by the switch with references to
chapters that contain more detailed information about configuring these interface types. The rest of the
chapter describes configuration procedures for physical interface characteristics.
chapters that contain more detailed information about configuring these interface types. The rest of the
chapter describes configuration procedures for physical interface characteristics.
Note
The stack ports on the rear of the Catalyst 3750-E switch are not Ethernet ports and cannot be configured.
These sections describe the interface types:
•
•
•
•