Cisco Systems 3750E 用户手册
38-26
Catalyst 3750-E and 3560-E Switch Software Configuration Guide
OL-9775-02
Chapter 38 Configuring IP Unicast Routing
Configuring OSPF
These sections contain this configuration information:
•
•
•
•
•
•
•
•
Note
To enable OSPF, the switch or stack master must be running the IP services feature set.
Default OSPF Configuration
shows the default OSPF configuration.
Table 38-5
Default OSPF Configuration
Feature
Default Setting
Interface parameters
Cost: No default cost predefined.
Retransmit interval: 5 seconds.
Transmit delay: 1 second.
Priority: 1.
Hello interval: 10 seconds.
Dead interval: 4 times the hello interval.
No authentication.
No password specified.
MD5 authentication disabled.
Area
Authentication type: 0 (no authentication).
Default cost: 1.
Range: Disabled.
Stub: No stub area defined.
NSSA: No NSSA area defined.
Auto cost
100 Mb/s.
Default-information originate
Disabled. When enabled, the default metric setting is 10, and the
external route type default is Type 2.
external route type default is Type 2.
Default metric
Built-in, automatic metric translation, as appropriate for each
routing protocol.
routing protocol.