Cuisinart CWC-1600 用户手册

4

MOVING THE WINE CELLAR
Using your Wine Cellar
Place your wine cellar on a flat surface that is 

strong enough to support it when fully loaded.
Gently place/slide the racks in the wine cellar. 
Plug the power cord into a standard electrical 

outlet and the unit will turn on automatically to the 

default setting.
Place bottles inside the cellar.
Determine the best setting to use: refer to the 

temperature guide for appropriate  serving 

temperatures (see page 7).
The unit’s cooling system operates efficiently with 

an ambient temperature of less than 70°F (21°C).

To assure that your wine cellar works at the 

maximum efficiency it was designed for, you 

should install it in a location where there is 

proper air circulation and electrical 

connections.

Allow 2" of space on both sides and rear of the 

wine cellar to allow proper ventilation.

To ensure proper internal air circulation, do not 

overfill your wine cellar.
This wine cellar is designed to be freestanding 

only, and should not be recessed or built in (fully 

recessed).

Do not plug unit into the same outlet as a 

refrigerator or microwave. 

Make sure there is a suitable power outlet (120 

volts, 15 amps) with proper grounding to power 

the wine cellar. 

Avoid the use of three-prong plug adapters or 

cutting off the third grounding prong in order 

to accommodate a two plug outlet. This is a 

dangerous practice since it provides no 

effective grounding for the wine cellar and may 

result in a shock hazard.

Your wine cellar has 4 leveling legs. After 

properly placing your wine cellar in its final 

position, you can level your wine cellar.

(Please note that the leg that stands on the 

hinge is the shorter leg.)

Leveling legs can be adjusted by turning them 

clockwise to raise the wine cellar or by turning 

them counterclockwise to lower the cellar.

Installation Limitations
Do not place heavy objects on top of the unit.
Do not locate the unit in a moist place or display in 

direct sunlight.
Do not place the unit next to a major appliance 

that emits large amounts of heat, such as a 

dishwasher, microwave, toaster oven, oven or 

barbecue, etc.

Do not install your wine cellar in any location 

not properly insulated or heated (garage, etc).

Select a suitable location for the wine cellar on 

a hard, even surface away from direct sunlight 

or heat source, e.g., radiators, baseboard 

heaters, cooking appliances, etc. Any surface 

unevenness should be corrected with the 

leveling legs located on the front and rear 

bottom corners of the wine cellar. Avoid 

placing unit where there may be electrical 

interference.