Festool PM571782 用户手册

6

 Always switch the tool off be-

fore connecting or disconnecting the pow-
er cord!

To switch on the tool, press the switch (2.1) 

downwards and forwards until it locks into 

place. To switch off, press the switch down-

wards - this releases the switch lock and it 

goes into the OFF position.

If an extension cord is required, it must 

have suffi cient cross-section to prevent an 

excessive drop in voltage or overheating. 

An excessive drop in voltage reduces the 

output and can lead to failure of the motor. 

The table below shows you the correct cord 

diameter as a function of the cord length 

for the RO 125 FEQ.

Use only U.L. and CSA listed extension 

cords. Never use two extension cords to-

gether. Instead, use one long one.

Note:  The lower the AWG number, the 

stronger the cord.

Total Extension Cord 

Lenght (feed)

25

50 100 150

Cord Size (AWG)

18

16

16

14

  The tool has full-wave electronics with 

the following features:

Smooth start-up
The smooth start-up ensures jolt-free 

startup.

Speed adjustment
You can regulate the speed steplessly be-

tween 3000 and 6000 rpm using the adjust-

ing wheel (3.1). This lets you optimize the 

sanding speed to suit the material.

Constant speed
The pre-selected speed remains constant 

whether the tool is in operation or in neu-

tral position.

Temperature control
To prevent overheating, the safety elec-